EV HT94 Horn with PRV D280Ti
HT94 with PRV D280Ti I was adamant about finding another compression driver with better power handling than the RX14 and the PDS182. This driver from PRV Audio fits the bill…. Read more >
HT94 with PRV D280Ti I was adamant about finding another compression driver with better power handling than the RX14 and the PDS182. This driver from PRV Audio fits the bill…. Read more >
JBL 2370A Horn with PRV Audio D280Ti Here is an alternative compression driver for the JBL 2370A, a PRV Audio D280Ti. It is a very affordable driver, almost half the… Read more >
Sparrow MTM-2 It was in 2017 that I designed the Sparrow-MTM. In that version, my aim was to design a MTM that’s easy on the pocket. In this MTM-2, sound… Read more >
PRV Audio D280Ti Specifications: • 1″ exit Titanium Diaphragm • Mounting type: 1-3/8″ 18 TPI • Frequency Response: 1,300Hz-20kHz • Sensitivity: 109dB @ 2.83V/1M • Impedance: 8Ω • Weight: 3.31… Read more >
Pyle PH810 Specifications: • Minimum frequency: 1,000 Hz • Nominal dispersion: 90° H x 40° V • Throat diameter: 1.0″ • Mounting type: 1-3/8″-18 UNEF • Dimensions: 7.9″ W x… Read more >
Pyle PH810 Specifications: • Minimum frequency: 1,000 Hz • Nominal dispersion: 90° H x 40° V • Throat diameter: 1.0″ • Mounting type: 1-3/8″-18 UNEF • Dimensions: 7.9″ W x… Read more >
Dayton Audio H07E Specifications: • Horn type: Elliptical Waveguide • Minimum frequency: 2,200 Hz • Nominal dispersion: 80° H x 50° V • Throat diameter: 1.0″ • Mounting type: 1-3/8″-18… Read more >
Cardinal Evaluation of Peerless 830874 with PRV D280Ti coupled to Dayton H07E horn Peerless 830874 Raw Response and at 2kHz Peerless 830874 Harmonic Distortion with 2kHz Low Pass Impedance sweep… Read more >
Having tested out two compression drivers with this PH565 horn, I’m still not too happy with the results. In this third attempt, I decided on the PRV D280Ti. Fig 1… Read more >
Here is another horn that looks good with 8″~12″ woofers. The Pyle PH810 measures approximately 10″ W x 8″ H and has a coverage of 90° H x 40° V…. Read more >