Pro Drivers – Matching Horns with Compression Drivers

My Favorite Horns + Drivers B&C ME10 + Selenium D220Ti  –  Flat Response from 1.5kHz to 10kHz Dayton H07E + PRV D280Ti  –  Flat Response from  2kHz to 8kHz. Linear roll-off. Lowest Xover = 1.7kHz Dayton H07E + Pyle PDS442  –  Frequency Response, Waterfall plot, Toneburst Energy Storage, Spectrogram & Harmonic Distortion Dayton H812 + Selenium D220Ti  –  Very Flat Response  from 1.5kHz to 10kHz. Linear roll-off. Lowest Xover = 800Hz FaitalPRO STH100 + Radian 450PB  –  Flat Response from 2kHz to 8kHz. Linear roll-off. Lowest Xover = 1.5kHz FaitalPRO STH100 + Selenium D220Ti  –  Flat Response from 2kHz to 10kHz. Linear roll-off. Lowest Xover = 1.5kHz JBL 2342 + JBL 2425 – Flat Response from 1.2kHz to 10kHz. Used in Blackbird-TA. Pyle PH810 + PRV D280Ti  –  Flat Response from 2kHz to 15kHz. Lowest Xover = 2kHz Selenium HC23-25 + Dayton D250P SEOS-12 + Selenium D220Ti  –  Flat Response from 1kHz to 10kHz

Compression Drivers	Horns Compatible
B&C DE250 Dayton D250P Peavey RX14 Peerless DFM-2535R00-08 PRV Audio D280Ti Pyle PDB512 Pyle PDS182 Pyle PDS221 Pyle PDS382 Pyle PDS442 Radian 450PB Radian 465PB Selenium D220Ti	Tested with: B&C ME10 Dayton H07E, H10RW, H812 DiySoundGroup SEOS-8, SEOS-12 FaitalPro STH100 PRV WG11-25 Pyle PH565, PH612, PH715, PH810 Selenium HL14-25, HC23-25
Horns + Drivers	Summary
Dayton H07E + Pyle PDS382 (2013)	Used in Nightingale-II
Dayton H07E + Pyle PDS442 (2018)	Tested with MCM 55-2960  Dayton PA200  Dayton DA270  Silver Flute W20RC38-08 Vifa M25WO49-08
Pyle PH12s + Peavey RX14 (2011)
Pyle PH565 + Selenium D220Ti Best Match	+/- 5dB Response from 2kHz to 10kHz. Lowest Xover = 1.5kHz Suitable for 8-10inch woofers
Pyle PH565 + Dayton D250P	+/- 5dB Response from 2.5kHz to 10kHz. Lowest Xover = 1.5kHz
Pyle PH565 + PRV D280Ti	+/- 4dB Response from 2kHz to 15kHz. Lowest Xover = 2kHz
Pyle PH565 + Peavey RX14	+/- 5dB Response from 2kHz to 20kHz. Lowest Xover = 2kHz
Pyle PH565 + Pyle PDS182	+/- 5dB Response from 2kHz to 10kHz. Lowest Xover = 2kHz
Pyle PH565 + Pyle PDS221 (2011)
Pyle PH612 + Pyle PDS382	Frequency Response with various filters
Pyle PH612 + Selenium D220Ti	+/- 5dB Response from 2kHz to 10kHz. Lowest Xover = 2kHz Suitable for 12 inch woofers
Pyle PH715 + Selenium D220Ti (2013)	Used in Nightingale-III
Pyle PH810 Driver Compatibility
Renkus Heinz Horn + Pyle PDB512 (2011)
Selenium HC23-25 + Pyle PDB512	+/- 3dB Response from 2kHz to 7kHz. Lowest Xover = 2.5kHz Suitable for 8-10 inch woofers
Selenium HC23-25 + Selenium D220Ti	+/- 5dB Response from 1.5kHz to 10kHz. Lowest Xover = 2kHz
Reviews
Dayton D250P Compression Driver	Tested with Dayton H812 horn
Tweeters
Fostex 025H27 Horn Tweeter Review	OWL-II
Selenium ST200 Super Tweeter Review	Tested with PA200  OWL
MidRange
Dayton PK165-8 (6″ Kevlar/Paper Cone)	with Audax TW010E1 Tweeter
Woofers
Altec Lansing CD912-8A Coaxial	T/S Parameters with Box Modeling
BBC MTG 1132	T/S Parameters with Box Modeling
Dayton PA200-8 8″ Woofer	Tested with Pyle PDS442 / Dayton H07E  Tested with ST200  OWL  OWL-II
Dayton PA310-8 12″ Woofer	T/S Parameters with Box Modeling
FaitalPro 10FE200-4 10″ Woofer	T/S Parameters with Box Modeling
MCM 55-2960 Die Cast 8″ Woofer	Tested with Fountek FE85  Tested with Pyle PDS442 / Dayton H07E
MCM 55-2981 Die Cast 10″ Woofer	T/S Parameters with Box Modeling
MCM 55-2982 Die Cast 12″ Woofer	T/S Parameters with Box Modeling
Peerless FSL-1020R02-08 10″ Woofer	T/S Parameters with Box Modeling
Radian 212-8	T/S Parameters with Box Modeling